Operating instructions

7. Push back the paper set levers to clamp the paper against the

guide rollers.

8. Before printing, make sure the paper release lever is set to the

single-sheet position. Also set the paper thickness lever to the

correct position for the paper loaded in the cut-sheet feeder,

as described on page 3-6. In your printer driver software,

select your paper size from the Paper Size list, and select

Sheet Feeder Bin-1

from the Paper Source list.

If you are printing from a DOS application, select the bin

number using the

Te a r O f f / Bi n

button on the control panel.

The cut-sheet feeder loads paper when you send data to the

printer. You can also load paper by pressing the

Load/Eject

button.

A64

Adonis Rev.C

A5 size Chapter 5

96/ 12/ 19 pass 5

5-10

Using Printer Options