Operating instructions

1. Make sure paper is loaded, then turn off the printer. While
holding down the
Fo n t
button, press the
Operate
button
to turn on the printer. The printer enters the default-setting
mode and prints the language selection sheet.
2. Press the
Fo n t
button until the
Fo n t
lights indicate the
language you want, as described on the language selection
sheet.
3. Press the
Te a r O f f / Bi n
button to print the default-setting
mode instruction sheets (three pages) in the language you
want.
Note:
The arrows on the instruction sheets indicate the printer’s current
settings.
4. Press the
Fo n t
button until the
Fo n t
lights indicate the option
you want to change, as described on the default-setting mode
instruction sheets.
5. Press the
Te a r O f f / Bi n
button until the
Condensed
and
Te a r O f f / Bi n
lights indicate the setting you want, as described
on the instruction sheets.
6. Repeat steps 4 and 5 to make any other settings you want.
Each time you press the
Te a r O f f / Bi n
button, the printer
saves the settings you selected.
7. When you finish changing the settings, press the
Operate
button to turn off the printer and exit the default-setting mode.
4
R
Adonis Rev.C
A5 size Chapter 4
96/ 12/ 19 pass 5
Using the Control Panel
4-15