Operating instructions

I/F (interface) mode
The printer has space for one optional interface in addition to its
built-in parallel interface. You can choose automatic, parallel, or
optional for the interface mode. When you select auto, the printer
automatically selects the interface that is receiving data, and uses
that interface until the end of the print job. This auto interface
allows you to share the printer among multiple computers without
making changes.
When you connect one computer to the printer, you can select
the parallel or optional interface according to the interface your
computer requires.
Auto I/F (interface) wait time
The printer determines which interface is receiving data and
switches to that interface until the end of the print job (when no
data is received from the selected interface for the amount of time
specified). You can specify either 10 seconds or 30 seconds.
So f t w a r e
When you select ESC/ P 2, the printer operates in the EPSON
ESC/ P 2 mode. When you select IBM the printer emulates an
IBM printer.
Character table
Your printer has 11 standard character tables as well as tables
for 20 other countries. See Appendix B for character samples.
International character set for Ita lic table
You can change eight characters in the Italic character table to suit
your printing needs. Since these characters are often used in other
languages, they are named after countries and are referred to as
international character sets. See Appendix B for character samples.
L
Adonis Rev.C
A5 size Chapter 4
96/ 12/ 19 pass 5
4-12
Using the Control Panel