Operating instructions

Te a r O f f / Bin (two lights, green)
The printer uses the two
Te a r O f f / Bi n
lights to indicate the
following:
f f
The perforation of your continuous paper is at
the tear-off position.
o n
The optional high-capacity cut-sheet feeder
(bin 1 of the double-bin feeder) is selected.
n o
The optional second-bin cut-sheet feeder (bin 2
of the double-bin feeder) is selected.
n n
Card mode is selected (for printing on postcards).
f
= Flashing,
n
= On,
o
= Off
Bu t t ons
Operate
Press this button to turn the printer on or off.
Pa u se
Press this button to temporarily stop printing, and press it again to
resume printing. To turn on the micro-adjust mode, stop printing
and hold down this button for at least 3 seconds. Press it again to
turn off the micro-adjust mode. See “Using Micro Adjust” in
Chapter 3 for details.
Lo a d / Eje c t
Press this button to advance single-sheet or continuous paper to
the loading position. (The printer normally loads paper
automatically.) If a single sheet is already in the loading position,
press this button to eject it. If continuous paper is in the loading or
tear-off position, press this button to feed it backward to the
standby position.
L
Adonis Rev.C
A5 size Chapter 4
96/ 12/ 19 pass 5
4-4
Using the Control Panel