Operating instructions

IBM 2390 Plus Emulation Control Codes
This printer emulates the IBM Proprinter with the following commands.
For detailed information, see the IBM 2390 Plus reference manual.
General operation:
NUL, DC3, ESC j, BEL, CAN, DC1, ESC Q, ESC [ K, ESC U, ESC [ F
Paper feeding:
FF, LF, ESC 5, ESC A, ESC A (AGM*), ESC 0, ESC 1, ESC 2, ESC 3,
ESC 3 (AGM*), CR, ESC ]
Page format:
ESC C, ESC C0, ESC X, ESC N, ESC O, ESC 4
Print position motion:
ESC d, ESC R, ESC D, HT, ESC B, VT, ESC J, ESC J (AGM*)
Font selection:
DC2, ESC P, ESC :, ESC E, ESC F, ESC I, ESC [d, ESC [I
Font enhancement:
DC4, SO, ESC SO, ESC W, ESC [ @, SI, ESC SI, ESC G, ESC H, ESC T,
ESC S, ESC -, ESC _, ESC [ -
Spacing:
BS, SP, ESC [ ¥
Character handling:
ESC 6, ESC 7, ESC [ T, ESC ^, ESC ¥
Bit im a ge:
ESC K, ESC L, ESC Y, ESC Z, ESC [ g, ESC * (AGM*)
Ba r co d e:
ESC [f, ESC [p
* A lte r n a t e Gr a p h ics M o d e
L
Adonis Rev.C
A5 size Appendix B
96/ 12/ 19 pass 5
B-6
Command Lists and Character Tables