Operating instructions

Lines of dots are missing in the printout.
Cause What to do
The print head is damaged. Stop printing and contact your dealer
to have the print head replaced.
w
Warning:
Never replace the print head yourself because other parts of the printer
must be checked at the same time.
Incorrect characters are printed.
Cause What to do
Your printer and the
computer may not be
communicating correctly.
Make sure that you use the correct
interface cable and that the
communications protocol is
correct. See page 1-10 and your
computer documentation. If you
installed the optional serial
interfacecard, also see page 5-19.
The wrong character table is
selected in your software.
Select the correct character table in
your software or using the
default-setting mode or the EPSON
Remote! utility. Note that he character
table setting in your software
overrides the settings made in the
default-setting mode or EPSON
Remote!.
7
Troubleshooting
R
Adonis Rev.C
A5 size Chapter 7
96/ 12/ 19 pass 5
Troubleshooting
7-19