Operating instructions

When the printer ejects the paper, the Pa p e r O ut light flashes
and the Pa u se light comes on.
Cause What to do
The printer has not fully
ejected your paper.
Remove the paper by hand; the
Paper Out light goes out. If you are
printing a multiple-page document,
insert a new sheet of paper into the
paper guide. The Pa use light goes out
and the printer automatically loads the
paper and resumes printing.
Continuous paper
The printer does not load continuous paper.
Cause What to do
The paper release lever is set
to the single-sheet position.
Set the paper release lever to the
tractor position. See “Setting the paper
release lever” in Chapter 3.
The paper has come off the
tractor.
Reattach the paper to the tractor as
described in “Loading continuous
paper with the tractor” in Chapter 3.
When you send data or press the Lo a d / E
j
ect button, the platen
rotates but the printer does not feed the paper.
Cause What to do
The paper release lever is set
to the single-sheet position.
Move the paper release lever to the
tractor position.
The paper has come off the
tractor.
Reattach the paper to the tractor as
described in “Loading continuous
paper with the tractor” in Chapter 3.
The paper has been fed back
to the standby position.
Press the Load/Eject button to load
the paper.
L
Adonis Rev.C
A5 size Chapter 7
96/ 12/ 19 pass 5
7-10
Troubleshooting