- EPSON user guide printer LQ-2070
Table Of Contents
- Front Cover
- Printer Parts
- Copyright
- Compliance
- Declaration of Conformity
- Energy Star / Saving
- Where to Get Help
- For UK Users
- Safety Instructions
- Contents
- Introduction
- 1. Setting Up the Printer
- 2. Paper Handling
- 3. Using the Printer
- 4. Using Printer Options
- 5. Maintenance and Transportation
- 6. Troubleshooting
- Appendix
- Glossary
- Index
- Overseas Marketing Locations
- Back Cover

This chapter explains how to set up the printer and install the
printer driver software.
Choosing a Place for the Printer
When selecting a place to set up your printer, be sure to follow
these guidelines:
❏
Place the printer on a flat, stable surface, close enough to
the computer for the interface cable to reach it.
❏
Leave adequate room around the printer for easy operation
and maintenance.
❏
Avoid locations that are subject to direct sunlight, excessive
heat, moisture, or dust.
❏
Use a properly grounded electrical outlet; do not use an
adapter plug.
❏
Place the printer where you can easily unplug the power
cord.
❏
Avoid electrical outlets controlled by wall switches or
automatic timers. An interruption of power can erase
information in the memory of your printer or computer.
❏
Avoid outlets on the same circuit as large motors or other
appliances that can cause voltage fluctuations.
❏
Keep the entire computer system away from potential
sources of electromagnetic interference, such as
loudspeakers or the base units of cordless telephones.
L
Sunflower-P
Rev.c
A5 size Chapter 1
01/09/96 pass 3
1-2
Setting Up the Printer










