Specifications

Reset

<ESC>

Both

I 1Bh

cFs>

1Ch

40h

Standkd

The command above resets the printer. There are no parameters. On receipt of this

command, the buffer is cleared, and all settings (with the following exceptions) are

restored to their power-up values.

l ASF settings made with the <ES6 EM command

l Panel mode settings

ASF (Automatic Sheet Feeder) control

cEsc>

<EM>

<n>

Both

1Bh

19h <n>

27 25 <*

The command above controls the operation of the ASF, where <Em is the ASCII

code 19h, and cn> may take the binary values OOh or 04h or the ASCII values “R”

or “T”. The effect of these values is summarized below:

Value Effect

OOh Select manual mode

Select auto mode

Elect paper

Set top print position. This parameter must be

followed by another @nary value (>l) signify-

ing the distance (in l/6 inch units) at which

printing should start below the top of the paper.

These commands will be ignored if the ASF has not been selected.