Product specifications

Rev. C Connecting to the Host Computer and Options 3-7

TM-L90/TM-L90 with Peeler Technical Reference Guide

3.2.4 With the Ethernet Interface 'IEEE802.3' (TM-L90 only)

TM printer with the ethernet interface is connected to a network with the ethernet cable via a

Hub.

Note:

The Ethernet interface TM printer does not accept a customer display (DM-D). Connect the customer

display to a POS terminal or appropriate equipment other than the printer.

Note:

When controlling the printer with OPOS, it is necessary to use exclusive control. Therefore, when using 1

printer with several PCs, it is necessary to take into account application programming whereby a PC that

already has the exclusive right must release it, then another PC must claim it.

Names of parts

The names of the various parts of the Ethernet interface are shown below.

Name of Parts

10 BASE-T Ethernet

interface

connector

LED (green)

LED (red) Switch

Pressing the power-supply

switch for too long when

power is on will reset the

system to its factory

defaults.

Take care not to

press LEDs by

mistake.