Product specifications

Rev. C Setup 2-51
TM-L90/TM-L90 with Peeler Technical Reference Guide
Select receive
buffer capacity(*)
Select capacity of receive
buffer: large or small.
-- -- Memory switch See “Items That Can
Be Set in the
Memory Switch
Setting Mode” on
page 2-22
Conditions for
Busy Status (*)
Select condition for Busy. -- -- Memory switch See Items That Can
Be Set in the
Memory Switch
Setting Mode” on
page 2-22
Data processing
when reception
error occurs
Select print “?” or ignored. -- -- Memory switch See “Items That Can
Be Set in the
Memory Switch
Setting Mode” on
page 2-22
#6 pin signal
select for reset
Serial interface reset -- -- Memory switch See “Items That Can
Be Set in the
Memory Switch
Setting Mode” on
page 2-22
#25 pin signal
select for reset
Serial interface reset -- -- Memory switch See “Items That Can
Be Set in the
Memory Switch
Setting Mode” on
page 2-22
#31 pin signal
select for reset
Parallel interface reset -- -- Memory switch See “Items That Can
Be Set in the
Memory Switch
Setting Mode” on
page 2-22
FEED button
operational
settings
FEED button operational
settings"
“FEED
button
operational
settings (TM-
L90 peeler
specification
continuous
issuing
mode only)”
on page 2-
32
-- Memory switch See “Items That Can
Be Set in the
Memory Switch
Setting Mode” on
page 2-22
Maximum
measurable
length in auto-
setting of paper
layout mode.
Maximum measurable
intervals between black
marks in auto-setting of
paper layout mode.
-- -- Memory switch See “Items That Can
Be Set in the
Memory Switch
Setting Mode” on
page 2-22
Feeding or not
feeding paper at
power on.
Determine with or without
the feeding function at
power on.
-- -- Memory switch See “Items That Can
Be Set in the
Memory Switch
Setting Mode” on
page 2-22