Product specifications

Rev. C Setup 2-23
TM-L90/TM-L90 with Peeler Technical Reference Guide
• Serial interface #25 pin: Selecting reset signal
• Serial interface #6 pin: Selecting reset signal
❏ Paper width selection
❏ FEED button operational settings (TM-L90 peeler specification only)
❏ Label Settings
• Maximum length of automatic paper measurement
• With or without the function of feeding paper to the print starting position at power on
• Recovery from paper layout error
Note:
Turning off the power supply in the memory switch setting mode clears all settings. After performing the
complete operation, turn off the power using the correct procedure.