Product specifications

Rev. C Setup 2-7
TM-L90/TM-L90 with Peeler Technical Reference Guide
5. To fine tune the amount of remaining paper that is detected by the N.E. detector, move the
N.E. detector holder shown in the illustration “N.E. Detector Holder” on page 2-7 and adjust
the position.
Note:
Note that the direction to move the roll paper N.E. detector varies depending on the method of printer
installation (vertical/horizontal).
N.E. Detector Holder
Adjustment Positions of N.E. Detector
Adjustment Position Number Specified Thermal Paper Dimension
#1 Approximately 36 mm {1.42"}
#2 Approximately 41 mm {1.61"}
N.E. detector holder
Adjustment direction for
horizontal installation
Adjustment direction for
vertical installation
Holder Position #1 for horizontal Holder Position #2 for horizontal
Holder Position #1 for vertical Holder Position #2 for vertical