Product specifications

B-12 Consumable Specifications Rev. C
B.1.3 Continuous label Roll Paper
B.1.3.1 Continuous label paper
Continuous label paper is label roll paper without labels die cut in predefined sizes. There are
types, back slit type or cut-off edge type:
Feature: Label size (length) is variable with an autocutter; therefore, it is possible to print labels
of various sizes. Compared with die-cut label, it is economic because of no die-cut cut-off edges.
Note:
Cut-off edges make it easier to remove a label from backing paper.
B.1.3.2 Specified continuous label roll paper
Epson provides the following:
Note:
The TM-L90 can use thermal roll paper with width of 38 ~ 70 mm or roll paper with width of 80 mm.
For two-color thermal roll paper, "Notes on Two-Color Paper Handling" on page B-23.
If solid printing or outline character printing on a label is executed, the print quality may be decreased.
B.1.3.3 Print Density Adjustment
For best print quality and reliability, select the proper print density for the paper type used as
described in the table below. If printing is performed with a density that exceeds the density
described in the table below, the reliability ("TM-L90" on page 6-5) is not guaranteed. Print
density can be set with a software command.
Roll paper
type no.
Printing
method Paper width Length
Rolls/b
ox Other
NTL080-ZEN Thermal
label
80mm {3.15"} Approx.
40m{1574.8"}
3 rolls Continuous label, label size
76mm {2.99" }width
Thermal paper type Original Paper No. Density Level
Original paper of single-color label roll paper 150HA 120%
Original paper of single-color label roll paper HW76B, HW76C, HD75, KL470, KL80GT 130%
Original paper of two-color label roll paper BR21
Back slit type
Cut-off edge type