Product specifications

Rev. C Consumable Specifications B-7
TM-L90/TM-L90 with Peeler Technical Reference Guide
B.1.2.6 In case that paper other than the specified original paper is used
If the paper other than the specified original paper is used, confirm whether the paper meets the
requirements for the thickness, the peeling strength, and the transparency rates.
B.1.2.7 Requirements for die-cut label size
When manufacturing die-cut label paper, be sure that the paper meets the following
requirements.
Label Size Requirement
Note:
❏ Be sure to set the cutting position (L4) between labels.
❏ Be sure that the distance from the cutting position to the print starting position (=L3-L4) is 3.6 mm
{0.14"} or more.
Label length + L2
L2 = 3 ~ 10