Product specifications

Rev. C Consumable Specifications B-3
TM-L90/TM-L90 with Peeler Technical Reference Guide
B.1.1.3 Print Density Adjustment
For best print quality and reliability, select the proper print density for the paper type used as
described in the table below. If printing is performed with a density that exceeds the density
described in the table below, the reliability ("TM-L90" on page 6-5) is not guaranteed. Print
density can be set with a software command.
B.1.1.4 Paper to use for high speed
If any of the following original paper types of receipt roll paper is used, the memory switch for
the customized value setting can be used to set a maximum print speed up to 150 mm/s
{5.91"/s} (level 9):
•PD150R
•PD160R
•TF50KS-E
•P350
• F5041
•KF50
•TF60KS-E
B.1.1.5 In case that paper other than the specified original paper is used
If the paper other than the specified original paper is used, confirm whether the paper meets the
requirements for the thickness, the peeling strength, and the transparency rates.
Thermal paper type Original Paper No. Density Level
Original paper of single-color receipt roll paper P350 90%
Original paper of single-color receipt roll paper KF50 95%
Original paper of two-color receipt roll paper PD750R 100%
Original paper of single-color receipt roll paper TF60KS-E, TF50KS-E, F5041
Original paper of single-color receipt roll paper TF11KS-ET, PD150R, PD160R 105%