User`s guide

H
Install the covers that came with your product over the protruding parts of the ink tank, and then hook the ink
tank unit onto the product.
I
Flip the feeder guard forward, close the paper support, and then flip the feeder guard back and close the output
tray.
J
Pull the release lever on the rear of the control panel until it clicks, and then lower the control panel to store.
K
Repack the product in its box, using the protective materials that came with it.
c
Important:
❏ Keep the product level during transport. Otherwise, ink may leak.
❏ After you move it, remove the tape securing the print head and the covers of ink tanks, then set the transportation
lock to the unlocked position. If you notice a decline in print quality, run a cleaning cycle or align the print head.
❏ Do not put opened ink bottles in the box with product.
User’s Guide
Maintaining Your Product and Software
73