Reference Guide

Maintenance and Troubleshooting 78
This frame cannot be used with
this camera.
The file size of the frame exceeds the camera’s limit. Copy a smaller
frame to the camera or card. See “Deleting and Copying Frames”
on page 60 for details.
The maximum number of
Frames that can be registered
to the memory card has been
reached.
See “Deleting and Copying Frames” on page 60 to delete
unnecessary frames.
No images. There are no images saved in the camera’s memory or on the
memory card.
This image cannot be
displayed.
The image file exists but can’t be displayed. Images that were taken
with another camera or saved on your computer may not display
on your camera.
This file cannot be deleted
because it is locked or form
some other reason
Release the write-protect switch on the side of the memory card.
Printer error. Turn the printer off for a few seconds then turn it back on. If the error
message still appears, turn the printer off and check to see if packing
materials r paper is stuck inside. Then turn the printer back on.
This image cannot be printed. Images taken with another camera or saved on your computer may
not print. Try printing from your computer.
Error message Description