Specifications

4-14 Specifications Rev. A
Confidential
❏ Since the slip TOF sensor uses a reflective photo sensor and it detects from the back of slip
paper, do not use paper that has holes or dark portions with low reflection (less than 40%
reflection) at the sensor position.
Area with No Paper Holes and Low Reflection
Endorsement Paper Specification
Paper type High- quality paper (only single-ply paper can be used)
Paper size 68 ~ 101.6mm (W) × 150 ~ 223mm (L) {2.68 ~ 4.17” (W) × 5.90 ~ 8.98” (L)}
Paper thickness 0.09 ~ 0.13mm {0.0035 ~ 0.0051”} (only single-ply can be used)
15
30
10
Paper feed direction
Paper holes and
translucence prohibited in
this area.
Area where paper holes are
prohibited and reflection
rate for the back of paper
should be 40% or more.
[Units: mm (All the numeric values are typical.)]