Specifications

Rev. A Specifications 4-13
TM-J7000/TM-J7100 Developer’s Guide
Confidential
Paper Specification
Paper Roll Specification
Slip Paper Specification
Notes on slip paper
❏ The slip paper must be flat, without curls or wrinkles, especially at the top edges. Otherwise,
the paper may rub against the nozzles and become dirty.
❏ Since the slip BOF sensor uses a photo sensor, do not use paper that has holes at the sensor
position, or is translucent.
Paper type Normal quality paper (only single-ply rolls can be used)
Form Roll paper
Paper width Can be selected an any of the following:
82.5 ± 0.5mm
76 ± 0.5mm
69.5 ± 0.5mm
57.5 ± 0.5mm
Paper thickness 0.06 ~ 0.09mm
Paper weight 52.3 ~ 64.0 g/m² {14 ~ 17 lb} (JIS P8124)
(45 ~ 55 kg / 1000pcs / 788mm × 1091mm)
Spool diameter inside: 10mm {0.39”) or more
Roll paper diameter Outside: 83mm {3.27”} or less
Paper type Normal paper
Paper size 68 ~ 230mm (W) × 68 ~ 297mm (L) {2.7 ~ 9.1” (W) × 2.7 ~ 11.7” (L)}
* The minimum paper size is 68mm (W) × 152mm (L) {2.7” (W) × 6.0” (L)}
Paper thickness 0.09 ~ 0.2mm {0.0035 ~ 0.0079”} (only single-ply can be used)