Specifications

4-10 Specifications Rev. A
Confidential
Insertion Direction and Endorsement Printing
Insert the check with the surface printed with the magnetic ink facing upward, following the slip
side guide.
Area of Personal Check where MICR Character Recognition is Impossible
Notes on Using the MICR Reader
❏ Do not install the printer near any magnetic fields, because this may cause MICR reading
errors. (Especially when the printer is used near the display device, the user must check the
recognition rate of the MICR.)
❏ The MICR characters may not be recognized when impact or vibration is applied to the
printer.
❏ Multiple fold checks are not supported.
❏ The personal checks must be flat, without curls, folds, or wrinkles (especially at the edges).
Otherwise, the check may rub against the nozzles and become ink-stained.
❏ Do not insert checks that have clips or staples. These may cause paper jams, MICR reading
errors, and damage to the MICR head.
Insertion
direction
46.0 {1.81"}
Area where recognition is impossible.