Specifications

Rev. A Specifications 4-7
TM-J7000/TM-J7100 Developer’s Guide
Confidential
Printing Position Versus Cutter Position
The printing position in relation to cutter position is shown in the figure below.
Printing Position Versus Cutter Position
Note:
Numeric values used here are typical values; the values may vary slightly as a result of paper slack or
variations in the paper. Take this note into account when setting the cutting position of the autocutter.
Slip Printer Section
Characters per Line and Printable Area for Slips
*: Selectable be a memory switch
Number of dots for printing (dots) 576
Printable width (mm) 81.3 {3.20”}
Characters per line Font A (12 × 24) 48 When printing at 15 cpi
Font B (9 × 17) 64 When printing at 20 cpi
* Font A (11 × 24) 52 When printing at 16.3 cpi
* Font B (8 × 17) 72 When printing at 22.5 cpi
Position to be left
uncut
Printing area
Last line of previous receipt
Approx. 34 mm
{1.34”}
Approx. 20 mm
{0.79”}
Emergency cutter position
Paper feed direction
Auto cutting position
See Note below