Specifications

3-6 Application Development Information Rev. A
Confidential
(*2) After processing GS ( G <Function 85>, the printer flashes the CUT SHEET LED and does
not take the next action until the paper is removed.
(*3) The print starting position can be set once per each printing of face of the slip.
NOTE:
The following shows the paper position and paper feeding directions for the single-pass processing. The
number of the picture corresponds to the number of the step in the table above.
❏ You can omit the processes you do not need.
Example: You can omit steps 5, 6, and 7 if you are not doing endorsement printing.
You can omit steps 8, 9 and 10 if there is handwriting on the surface side.
❏ For details of the commands and the programming samples, see the ESC/POS Application
Programming Guide.
The following shows the paper position and paper feeding directions for the single-pass
processing. The number of the picture corresponds to the number of the step in the table above.