Specifications

Rev. A Adjustments and Settings 2-17
TM-J7000/TM-J7100 Developer’s Guide
Confidential
For IBM POS systems
When installing this printer on an IBM POS system (IBM Sure POS 700 series, or IBM 4694
models 041, 044, and 144), follow the procedure below.
1. Remove the rubber feet.
2. Install new rubber feet as shown in the following illustration.
Note:
You can get rubber feet separately by using the part numbers in the brackets as follows.
❏ Rubber foot <1075187>
Remove these rubber feet. Install new rubber feet here.