Specifications

2-12 Adjustments and Settings Rev. A
Confidential
Press the FEED button the number of times required to select the desired auto carriage return
setting.
❏ Interface reset signal
Pins #25 and #6 on the RS-232 I/F circuit board unit (UB-S01/02) are used to input the reset
signal. This item is used to "Enable (acknowledge)" or "Disable (not acknowledge)" input of the
reset signal from one of these pins. Press the FEED button the number of times required to select
the desired interface reset signal setting.
Connection Form and Cables
Serial Connection
When the TM printer is connected to the host PC with a serial interface, the following connection
forms are possible:
• Stand alone
• Y-connection
• Pass-through connection
Press FEED button Setting select ed
0 times: No change
1 time: Enabled
2 times: Disabled
3 or more times: No change
Press FEED button Setting selected
Pin #25 Pin #6
0 times: No change
1 time: Disabled Disabled
2 times: Enabled
3 times: Enabled Disabled
4 times: Enabled
5 or more times: No change