Specifications

2-10 Adjustments and Settings Rev. A
Confidential
Selecting individual settings
Autocutter
Press the FEED button the number of times required to select the desired Autocutter setting.
Basic serial interface setting
To select transmission conditions, first choose Serial interface settings; then select Data
length, handshake, or parity.
Press the FEED button the number of times required to select the desired Serial interface
settings used for transmission conditions.
bps: Indicates the number of transmitted bits per second (bps).
Press FEED button Setting to select
0 times: No change
1 time: Autocutter enabled
(Note: “Installed” is printed in the setting guidance)
2 times: Autocutter disabled
(Note: “Not installed” is printed in the setting guidance)
3 or more times: No change
Press FEED button Setting selected
0 times: No change
1 time: 115200 bps
2 times: 57600 bps
3 times: 38400 bps
4 times: 19200 bps
5 times: 9600 bps
6 times: 4800 bps
7 times: 2400 bps
8 or more times: No change