Specifications

Rev. A Adjustments and Settings 2-7
TM-J7000/TM-J7100 Developer’s Guide
Confidential
Customized value is defined as follows:
Customized Value
Communication conditions for the serial interface are defined as follows:
Communication Conditions for the Serial Interface
Memory switch setting mode
In the Memory switch setting mode you can set some Memory switches using printer buttouns.
This mode can set following settings.
❏ Enable or disable autocutter operation (Msw 2-1)
❏ Set the communication condition of the serial interface (Communication conditions for the
serial interface)
❏ Setting the conditions for communication
• Conditions for BUSY (Msw1-3)
Item Value
Paper width selection
57.5 mm {2.26"}
69.5 mm {2.74"}
76 mm {2.99"}
82.5 mm {3.25"}
Item Value
Baud rate
2400 bps
4800 bps
9600 bps
19200 bps
38400 bps
57600 bps
115200 bps
Parity
None
Odd
Even
Handshaking
DTR/DSR control
XON/XOFF control
Data length
7 bits
8 bits