Specifications

Rev. A Adjustments and Settings 2-1
TM-J7000/TM-J7100 Developer’s Guide
Confidential
Chapter 2
Adjustments and Settings
Using Different Paper Width
This printer accommodates 76 mm wide paper rolls with no adjustment; however you can
change the roll paper width to 82.5 mm, 69.5 mm, or 57.5 mm.
Follow the instructions below to change the roll paper width.
1. Open the roll paper cover.
2. Loosen the screw that holds the roll paper guide.
3. Slide the guide to the desired position.
4. Tighten the screw.
5. After setting the paper width, you need to change the memory switch setting. See xx for
instructions.
Paper Near-End Sensor
The diameter of the paper remaining on the roll paper can be detected at one of four levels by
the adjustment described below.
spacer
76
82.5
69.5
57.5