Specifications

1-22 Product Overview Rev. A
Confidential
Errors that are Possible to Recover
Note:
If the printer recovers from an error that has the possibility of recovery with DLE ENQ (n = 1) when the
printer has selected the slip as the paper source and an error has occurred while printing on the slip, the
printer ejects the slip first if it is still remains, and enters the paper waiting state. However, if the printer
recovers from a cut sheet ejection error, the printer ejects the slip only, and does not enter the paper
insertion waiting state.
If the printer recovers from an error that has the possibility of recovery with DLE ENQ (n = 1) when the
printer has selected the slip as the paper source and an error has occurred except when printing on the slip,
the printer ejects the slip first if it is still remains, and selects the slip as the paper source, and does not
enter the paper insertion waiting state.
If the printer recovers from an error that has the possibility of recovery with DLE ENQ (n = 2) when slip
is set as the paper source, the printer ejects the slip only if it still remains.
Error Description
ERROR LED Flashing Pattern
Recovery Condition
Paper roll cover
open error (when
Possible recovery is
selected by the
memory switch)
Roll paper cover
open is detected
during printing on the
roll paper.
Recovers by DLE ENQ
(n = 1) or DLE ENQ (n
= 2) with the cover
closed.
Autocutter error The autocutter does
not work correctly.
Recovers by DLE ENQ
(n = 1) or DLE ENQ (n
= 2) with the cover
closed.
Carriage home
position detection
error
The home position
cannot be detected
because of a paper
jam.
Recovers by DLE ENQ
(n = 1) or DLE ENQ (n
= 2) with the cover
closed.
Carriage out of
phase detection
error
The carriage is out of
phase.
Recovers by DLE ENQ
(n = 1) or DLE ENQ (n
= 2) with the cover
closed.
Cut sheet ejection
error
The cut sheet cannot
be ejected even if a
certain amount is
fed.
Recovers by DLE ENQ
(n = 1) or DLE ENQ (n
= 2) with the cover
closed.
approx. 320 ms