Specifications

Rev. A Product Overview 1-17
TM-J7000/TM-J7100 Developer’s Guide
Confidential
❏ Printer mechanisms
❏ Print quality
❏ Control software version
❏ DIP switch settings
❏ Memory switch settings
❏ Paper width to be set
Self-test on roll paper
Follow the following procedure to start the self-test on roll paper.
1. To start the self-test on roll paper, hold down the receipt FEED button while turning on the
printer with the cover closed.
2. When all printer states have been printed, make sure that the following message is printed
and the PAPER OUT LED blinks.
“If you want to continue SELF-TEST printing, please press FEED button.”
The printer is now in the self-test wait mode.
3. To continue the self-test, press the FEED button when the printer is in the self-test wait
mode.
4. Make sure that the following message is printed.
*** completed ***
The printer will now be initialized and returned to the normal operating mode.
Self-test on a cut sheet
Follow the following procedure to start the self-test on a cut sheet.
1. Hold down the CLEANING button while turning on the printer with the cover closed.
2. The printer flashes the CUT SHEET LED and enters the paper insertion waiting state. Insert
a cut sheet to begin printing the printer status.
3. After printing the current printer status, the printer ejects the cut sheet and waits for the next
sheet of paper to be inserted. Insert another cut sheet to begin printing the test.
4. After a number of lines are printed, the printer indicates the end of the self-test by printing
“*** completed ***,” initializes, and goes into the normal mode.