Specifications

1-10 Product Overview Rev. A
Confidential
CAUTION:
Be sure to use roll paper that meets the specifications.
Follow these steps to install or replace paper:
1. Make sure the printer is on.
2. Open the roll paper cover by pressing the cover open button.
3. Remove the used roll paper core if there is one.
4. Put the roll paper inside the printer in the correct direction, as shown in the illustrations
below.
5. Pull out the leading edge of the roll paper; then close the roll paper cover until it is firmly
locked by pushing the top of the cover.
6. The printer will automatically feed the roll paper to remove any slack in the paper.
Note:
Do not open the roll paper cover during printing or paper feeding.