Specifications

Rev. A Product Overview 1-9
TM-J7000/TM-J7100 Developer’s Guide
Confidential
Power Switch Cover
You can use the enclosed power switch cover to make sure that the power switch is not
accidentally
pressed. Just press the cover into place to install it. If you need to turn the power switch on or off
with the cover attached, you can insert a thin tool into one of the holes in the cover to operate the
switch.
WARNING:
If an accident occurs when the power switch cover is attached, immediately unplug
the power supply cable to avoid fire.
If you are going to store the printer or leave it unused for a long time, turn it off using the power
switch on the printer.
Installing or Replacing Roll Paper
CAUTION:
Be careful not to insert your fingers into the paper exit. The cutter blade is installed inside
the paper exit and you might be injured.