Specifications

Rev. A Product Overview 1-7
TM-J7000/TM-J7100 Developer’s Guide
Confidential
PAPER OUT
Lights when roll paper is out or nearly out. Flashes when the printer is in the self test standby
state.
CUT SHEET
Lights when cut sheet (slip, check) is selected as print sheet. Off when roll paper is selected as
print sheet. Flashes when the printer is in the cut sheet insertion or removal waiting state.
Buttons
PAPER FEED
PAPER FEED feeds the roll paper based on the line spacing set by the ESC 2 or ESC 3 command.
The printer feeds the roll paper if the roll paper is selected as the paper source or feeds the cut
sheet when the cut sheet is selected as the paper source.
The back of a slip is fed by the PAPER FEED button in the reverse direction to when the paper is
fed in the forward direction.
Note:
Paper cannot be fed using this button in the following cases:
• When check is selected as the print sheet.
• Roll paper cover is open when roll paper is selected as print sheet.
• Printer is in the slip insertion or removal state when slip is selected as print sheet.
Slip insertion waiting
approx. 320
Personal check insertion waiting
approx. 1760
approx. 320
Slip removal waiting state
approx. 2080
approx. 320