Specifications

1-6 Product Overview Rev. A

Confidential

LEDs

POWER

Lights when the power is on and is off when the power is off; flashes during cleaning and other

operations such as power-on and power-off.

Power on process (when an operation is being executed): Flashing

Power off process (after DLE DC4, fn = 2 is executed): Flashing

Note:

Never open the printer cover or turn off the printer when the POWER LED is flashing.

ERROR

Lights when the printer is offline except during paper feeding using the PAPER FEED button,

during self-test, or cleaning. Off when the printer is online. Flashes when an error occurs. See the

Error LED Codes section in this Chapter.

INK OUT

Lights when the ink cartridge is not installed or ink is out. The ink cartridge needs to be

replaced. Off when the ink cartridge is installed and ink is adequate. Flashes when the ink is

nearly out. (If the ink is out, the printer also goes offline and the ERROR LED lights.) The

TM-J7000 has two INK OUT LEDs, one for the color cartridge and one for the black cartridge.)

Note:

The number of printable characters from when the ink near end status is detected to when the ink is out

differs depending on the conditions. When ink near end is detected, prepare to replace the ink cartridge.

Detection of ink cartridge installation and the ink near end status is performed only when the carriage

cover is closed. If the carriage cover is open, the INK OUT LED keeps the same status as before the carriage

cover was opened.

320 ms

160 ms

2400 ms