Operation Manual

Set options
68
Set options - Adjust performance
When you click the Adjust performance tab on the Set options screen, the
following screen is displayed.
Projection Quality Sets the priority for projected image quality and transfer
speed.
• Image Priority: Transfers projected image data with a
low compression ratio to prioritize image quality.
• Speed Priority: Compresses projected image data to
increase transfer speed.
Use Bandwidth Controls the bandwidth for the data transfer. When you
select a narrower bandwidth, the projected image
quality may decline but the network load is reduced.
Lower the resolution and
transfer
Available only when the Use Bandwidth is set to
1Mbps or more and when you connect to the projector
with a resolution of WUXGA (1920 × 1200).
Select to reduce the size of the data to be transferred to
the projector by lowering the resolution. Use this option
on a slow network or if it takes too long to display the
image or projection is interrupted.
Transfer layered window Windows 7 (when Windows 7 Basic is selected as the
theme) only
When using a layered window, contents such as
messages displayed on the computer are not projected
by the projector. Select this to project contents from a
different layered window.
If the mouse pointer flickers on the screen, select Make
the movement of the mouse pointer smooth on the
General settings tab.
Version Displays Epson iProjection version information.
Restore Defaults Resets all adjustment values for Set options to their
default settings, except for Switch LAN on the General
settings tab.
gg Related Links
• "Changing the Number of Projected Panels" p.32
• "Projecting Your Screen" p.42
• "Controlling the Connection Bandwidth" p.48