Operation Manual

Search Screen
62
When you start Epson iProjection, the search screen is displayed.
A
User name Displays the user name displayed in the user list on the
projection control screen. You can edit the user name on
the User Settings tab on the Set options screen.
B
Automatic search Searches for projectors on the network to which the
computer is connected.
C
Manual search
(Advanced
Connection Mode
only)
Searches for projectors on the network by specifying the
projector's IP address or projector name.
D
Profile Searches for projectors on the network by using the
projector information saved previously.
E
Profile list Displays the registered profiles (projector information).
When you double-click the profile, the projectors
registered in the profile are searched for on the network.
F
Set options Displays the Set options screen.
G
Join Connects to the selected projectors.
H
List of Connected
Projectors
(Advanced
Connection Mode
only)
Displays information on the projectors selected from the
Projector List. Even if the search method is changed, the
content of the List of Connected Projectors remains the
same.
I
Register (Advanced
Connection Mode
only)
Registers the projectors from the List of Connected
Projectors to a profile.
J
Connect as a
Moderator, or
disable interrupt
connections.
Connects to the selected projectors as the moderator and
you can prevent any other users from interrupting your
connection (supported models only).
The moderator function is available only on the
Standard Edition of the software.
K
Clear list Clears information displayed in the Projector List and
the List of Connected Projectors.
L
Projector List Displays a list of the projectors found on the network.
You can then select projectors to connect to. The search
results for each search method (Automatic search,
Manual search, and Profile) are displayed in separate
lists.
• Status: See the description of projector status icons in
the next table.
• Projector name: Displays the projector's name.
• SSID (Quick Connection Mode only): Displays the
projector's SSID.
• Signal Intensity (Quick Connection Mode only):
Displays the signal intensity when a connection is
made in Quick Connection Mode. As the Signal
intensity increases, so does the number of lit
indicators.
• IP address (Advanced Connection Mode only):
Displays the projector's IP address.
• Comments: Displays comments for the projector. You
can edit the comment by right-clicking the profile, and
then clicking Property. You can enter up to 32
characters.
M
Refresh Updates information in the Projector List.