Operation Manual

Connection Methods
24
The computer screen for the user who connects first is projected in full screen
mode. Users who connect later can project their own screen by clicking the
button on the toolbar or can control the projected display from the
projection control screen by clicking the button on the toolbar.
a
• When a connection is established, the input source for the projector
automatically switches to the LAN source if no other signal is being
input. If the input source does not automatically switch to the LAN
source, press the [LAN] button or [Source Search] button on the
remote control.
• The displayed toolbar varies depending on the connection method
and the edition of the software.
• When using the moderator function, only the moderator can control
the projected display.
gg Related Links
• "Setting Up a Projector to Connect in Advanced Connection Mode
(Wireless)" p.14
• "Setting Up a Projector to Connect in Advanced Connection Mode (Wired)"
p.15
• "Disconnecting" p.35
• "Selecting the Projector Search Method" p.25
• "Controlling the Projected Display" p.31
• "Searching for Network Projectors Using a Shortcut" p.37