Operation Manual

Connection Methods
21
f
Enter the Projector Keyword displayed on a screen, and then press OK.
g
When the following dialog box is displayed, enter the passphrase set on
the projector, and then click Connect.
a
If you select Save the passphrase and don't show this dialog
box again, the projector's SSID and passphrase are saved on the
computer and this dialog box is not displayed the next time you
connect. You do not have to enter the passphrase again.
If the projector's passphrase has not been changed from the
default, the following dialog box is displayed. Change the
passphrase from the projector's Network menu.
When a connection is established, the computer screen is projected and the
following toolbar is displayed on the computer screen.
The computer screen for the user who connects first is projected in full screen
mode. Users who connect later can project their own screen by clicking the
button on the toolbar or can control the projected display from the
projection control screen by clicking the button on the toolbar.