Operation Manual

Connection Methods
19
• Only one user is the moderator and has full control over the meeting using
the moderator function. (Holding a class or lesson using the participants'
computer screens in an educational environment.)
a
To start a meeting using the moderator function, one user must
connect to the projector as the moderator and the other users must
connect to the projector as participants.
gg Related Links
• "Changing the Moderator" p.43
• "Connecting to the Projector from the Software over a Network System"
p.22
Connecting the Projector and a Computer Directly
Using Wireless Communication
When your projector is set up as indicated below, you can connect the
projector and a computer directly using wireless communication to project
the computer's screen.
• The wireless LAN unit is installed in the projector or the projector has built-
in wireless LAN modules.
• The projector's connection method is set to Quick.
a
• When you use the Participant Edition of the software, you must
connect the projector and a computer over a network system.
• When you connect the projector and a computer directly using
wireless communication, the connection between the computer and
an access point is disconnected.
• Make sure you turn on your computer's wireless communication
function.
a
Press the [LAN] button or [Source Search] button on the remote
control to switch the input source to LAN.
The LAN standby screen is projected.