Operation Manual

Selecting Projector Network Settings
15
g
Turn on wireless LAN support.
a
The necessary settings vary depending on your projector. See
your projector User's Guide for instructions.
h
Select Advanced for Connection Mode.
i
Select other options as necessary for your network. See your projector
User's Guide for instructions.
j
Select security settings on the Security menu as necessary for your
network. Check with your network administrator for more information
on making the correct settings.
k
When you have finished making settings, select Setup Complete or
Complete, and follow the on-screen instructions to save your settings
and exit the menus.
gg Related Links
• "Connecting to the Projector from the Software over a Network System"
p.22
Setting Up a Projector to Connect in Advanced
Connection Mode (Wired)
To connect a computer to the projector using a wired LAN, you need to select
network settings on the computer and the projector.
a
Contact your network administrator and check that DHCP is available
under the current network environment.
a
If DHCP is not available, write down the following values that
are available for your projector.
• IP Address
• Subnet Mask
• Gateway Address
b
Connect the computer to the network.
a
To set up a network connection, if necessary, see the
documentation supplied with your computer or network adapter.
c
Connect a LAN cable to the projector.
d
Turn on the projector.
e
Press the [Menu] button on the remote control or the control panel,
select the Network menu, and select Network Configuration.
f
Select Wired LAN.
A screen like one of the following is displayed.
g
Select IP settings as necessary.
• DHCP is available: Set DHCP to On.