User Guide

121
Status light Power light Lamp light Temp light Status and solution
Flashing blue Off Orange Off Lamp has a problem
• Check the Lamp Hours in the Info
menu to see if the lamp is burned out.
Unplug the projector, wait for the lamp
to cool down, and check if it is broken
or installed incorrectly; reseat or
replace the lamp as necessary
• Clean or replace the air filter
• Make sure the lamp cover is closed
• If operating the projector at high
altitude, turn on High Altitude Mode
• If the problem persists, unplug the
projector and contact Epson for help
Blue Blue Flashing
orange
Off Replace the lamp soon to avoid
damage; do not continue using the
projector
Flashing blue Off Off Flashing
orange
A fan or sensor has a problem; turn the
projector off, unplug it, and contact
Epson for help
Flashing blue Off Flashing
orange
Flashing
orange
Auto Iris error; turn the projector off,
unplug it, and contact Epson for help
Flashing blue Off Orange Orange Power error; turn the projector off,
unplug it, and contact Epson for help
Flashing blue Off Flashing
orange
Off Internal projector error; turn the
projector off, unplug it, and contact
Epson for help
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic: Solving Problems
Related references
Image Quality Settings - Image Menu