User's Guide Scanner GT-2500
Table Of Contents
- Copyright and Trademarks
- Contents
- Safety Instructions
- Overview of Your Scanner Features
- Guide to the Scanner Parts
- Placing Originals on the Scanner
- Scanning Using the Automatic Document Feeder
- Scanning Using the Document Table
- Using the Scanner Features
- Using the Optional Network Image Express Card
- Maintenance
- Troubleshooting
- Reading the Scanner Lights
- Scanner Problems
- Scanning Software Problems
- Scan Quality Problems
- The Edges of Your Document Are Not Scanned
- You See Only a Few Dots in Your Scanned Image
- A Line of Dots Always Appears in Your Scanned Images
- Straight Lines in Your Image Come Out Crooked
- Your Image is Distorted or Blurred
- Colors Are Patchy or Distorted at the Edges of Your Image
- Your Scanned Image is Too Dark
- An Image on the Back of Your Original Appears in Your Scanned Image
- Ripple Patterns Appear in Your Scanned Image
- Characters Are Not Recognized Well When Converted into Editable Text (OCR)
- Scanned Colors Differ from the Original Colors
- Automatic Document Feeder Problems
- Optional Network Image Express Card Problems
- Uninstalling Your Scanning Software
- Where To Get Help
- Technical Specifications
- Index
Scanning Using the Document Table 97
5
5
5
5
5
5
5
5
5
5
5
5
3. In Professional Mode, you can fine-tune the size using
additional tools. Click the + (Windows) or r (Mac OS X) next
to Target Size to display these tools:
❏ To size your image by a certain percentage, adjust the
Scale value.
❏ To change the way your image is cropped, turn Trimming
on or off. (See EPSON Scan Help for details.)
❏ To unlock the proportions of your scan size, click the
lock icon. Then adjust the marquee or enter new
width/height measurements.
4. Once you have selected your scan size, you can click and drag
the marquee to the area in the image you want to scan. For
details, see "Adjusting the Scan Area (Marquee)" on page 87.
The marquee proportions are retained as you adjust it.
If you need to rotate the marquee for a landscape or portrait
image, click the orientation icon. (Not available if you are
scanning at the Original Target Size.)
Note:
For more information about using the Target Size tools, click Help
in the EPSON Scan window.
5. Now you are ready to scan your image(s). See "Finishing the
Scan" on page 98 for instructions.