User's Guide Scanner GT-2500
Table Of Contents
- Copyright and Trademarks
- Contents
- Safety Instructions
- Overview of Your Scanner Features
- Guide to the Scanner Parts
- Placing Originals on the Scanner
- Scanning Using the Automatic Document Feeder
- Scanning Using the Document Table
- Using the Scanner Features
- Using the Optional Network Image Express Card
- Maintenance
- Troubleshooting
- Reading the Scanner Lights
- Scanner Problems
- Scanning Software Problems
- Scan Quality Problems
- The Edges of Your Document Are Not Scanned
- You See Only a Few Dots in Your Scanned Image
- A Line of Dots Always Appears in Your Scanned Images
- Straight Lines in Your Image Come Out Crooked
- Your Image is Distorted or Blurred
- Colors Are Patchy or Distorted at the Edges of Your Image
- Your Scanned Image is Too Dark
- An Image on the Back of Your Original Appears in Your Scanned Image
- Ripple Patterns Appear in Your Scanned Image
- Characters Are Not Recognized Well When Converted into Editable Text (OCR)
- Scanned Colors Differ from the Original Colors
- Automatic Document Feeder Problems
- Optional Network Image Express Card Problems
- Uninstalling Your Scanning Software
- Where To Get Help
- Technical Specifications
- Index
Scanning Using the Automatic Document Feeder 61
4
4
4
4
4
4
4
4
4
4
4
4
Selecting the Scan Size
You can scan your images at their original size, or you can reduce
or enlarge their size as you scan them. You do this using the Target
Size setting in Professional Mode.
Professional Mode
If you are going to scan your image to a particular size, you should
select the Target Size setting after previewing it, but before
adjusting your scan area (indicated by the marquee). This sets the
scan area to the correct proportions so your image will not be
cropped unexpectedly.