User's Guide Scanner GT-2500
Table Of Contents
- Copyright and Trademarks
- Contents
- Safety Instructions
- Overview of Your Scanner Features
- Guide to the Scanner Parts
- Placing Originals on the Scanner
- Scanning Using the Automatic Document Feeder
- Scanning Using the Document Table
- Using the Scanner Features
- Using the Optional Network Image Express Card
- Maintenance
- Troubleshooting
- Reading the Scanner Lights
- Scanner Problems
- Scanning Software Problems
- Scan Quality Problems
- The Edges of Your Document Are Not Scanned
- You See Only a Few Dots in Your Scanned Image
- A Line of Dots Always Appears in Your Scanned Images
- Straight Lines in Your Image Come Out Crooked
- Your Image is Distorted or Blurred
- Colors Are Patchy or Distorted at the Edges of Your Image
- Your Scanned Image is Too Dark
- An Image on the Back of Your Original Appears in Your Scanned Image
- Ripple Patterns Appear in Your Scanned Image
- Characters Are Not Recognized Well When Converted into Editable Text (OCR)
- Scanned Colors Differ from the Original Colors
- Automatic Document Feeder Problems
- Optional Network Image Express Card Problems
- Uninstalling Your Scanning Software
- Where To Get Help
- Technical Specifications
- Index
54 Scanning Using the Automatic Document Feeder
3. You can do the following to adjust the image:
❏ To select your scan area, click the auto locate icon to
place a marquee that marks the edges of your image area.
You can move the marquee to change the scan area. See
"Adjusting the Scan Area (Marquee)" on page 55 for
instructions.
Note:
If you are going to scan at a different size than your original,
you must first select your Target Size and automatically create
a marquee that is proportioned to that size. See "Selecting the
Scan Size" on page 61 for instructions.
❏ To zoom in on an image, click inside the scan area and
click the Zoom button. EPSON Scan prescans again and
displays a larger preview on the Zoom tab.
❏ To adjust the image quality, click the image and make the
adjustments as described in "Adjusting the Color and
Other Image Settings" on page 58.
4. When you have finished adjusting the scan area, and
modifying the color and image settings, you can select the size
of your scanned image, if you have not already selected it. See
"Selecting the Scan Size" on page 61 for instructions.