User's Guide Scanner GT-2500
Table Of Contents
- Copyright and Trademarks
- Contents
- Safety Instructions
- Overview of Your Scanner Features
- Guide to the Scanner Parts
- Placing Originals on the Scanner
- Scanning Using the Automatic Document Feeder
- Scanning Using the Document Table
- Using the Scanner Features
- Using the Optional Network Image Express Card
- Maintenance
- Troubleshooting
- Reading the Scanner Lights
- Scanner Problems
- Scanning Software Problems
- Scan Quality Problems
- The Edges of Your Document Are Not Scanned
- You See Only a Few Dots in Your Scanned Image
- A Line of Dots Always Appears in Your Scanned Images
- Straight Lines in Your Image Come Out Crooked
- Your Image is Distorted or Blurred
- Colors Are Patchy or Distorted at the Edges of Your Image
- Your Scanned Image is Too Dark
- An Image on the Back of Your Original Appears in Your Scanned Image
- Ripple Patterns Appear in Your Scanned Image
- Characters Are Not Recognized Well When Converted into Editable Text (OCR)
- Scanned Colors Differ from the Original Colors
- Automatic Document Feeder Problems
- Optional Network Image Express Card Problems
- Uninstalling Your Scanning Software
- Where To Get Help
- Technical Specifications
- Index
48 Scanning Using the Automatic Document Feeder
❏ Open image folder after scanning
Select this option if you want Windows Explorer or the
Macintosh Finder to automatically open the folder where
your scanned image is saved when EPSON Scan finishes
scanning.
5. Click OK. EPSON Scan starts scanning.
The scanned image is automatically saved in the file and
location you chose.
Changing the Scan Mode
To change the scan mode, click the arrow in the Mode box at the
top right of the EPSON Scan window. Then select the mode you
want to use from the list that appears.
Note:
❏ When you scan using the ADF, only Office Mode and Professional
Mode are available. It is best to scan using Office Mode.
❏ The mode you select remains in effect when you start EPSON Scan
the next time.