User's Guide Scanner GT-2500
Table Of Contents
- Copyright and Trademarks
- Contents
- Safety Instructions
- Overview of Your Scanner Features
- Guide to the Scanner Parts
- Placing Originals on the Scanner
- Scanning Using the Automatic Document Feeder
- Scanning Using the Document Table
- Using the Scanner Features
- Using the Optional Network Image Express Card
- Maintenance
- Troubleshooting
- Reading the Scanner Lights
- Scanner Problems
- Scanning Software Problems
- Scan Quality Problems
- The Edges of Your Document Are Not Scanned
- You See Only a Few Dots in Your Scanned Image
- A Line of Dots Always Appears in Your Scanned Images
- Straight Lines in Your Image Come Out Crooked
- Your Image is Distorted or Blurred
- Colors Are Patchy or Distorted at the Edges of Your Image
- Your Scanned Image is Too Dark
- An Image on the Back of Your Original Appears in Your Scanned Image
- Ripple Patterns Appear in Your Scanned Image
- Characters Are Not Recognized Well When Converted into Editable Text (OCR)
- Scanned Colors Differ from the Original Colors
- Automatic Document Feeder Problems
- Optional Network Image Express Card Problems
- Uninstalling Your Scanning Software
- Where To Get Help
- Technical Specifications
- Index
Technical Specifications 175
B
B
B
B
B
B
B
B
B
B
B
B
Environmental
Interfaces
USB Interface
Optional Interface
Temperature Operating 5 to 35 °C (41 to 95 °F)
(when scanning with ADF: 10 to 32 °C (50
to 90 °F))
Storage -25 to 60 °C (-13 to 140 °F)
Humidity Operating 10 to 80%, without condensation
(when scanning with ADF: 20 to 80%)
Storage 10 to 85%, without condensation
Operating conditions Ordinary office or home conditions.
Avoid operating the scanner in direct
sunlight, near a strong light source, or in
extremely dusty conditions.
Interface type Universal Serial Bus Specification Revision 2.0
Electrical standard Full Speed mode (12 Mbits per second) and
Hi-Speed mode (480 Mbits per second) of Universal
Serial Bus Specification Revision 2.0.
Connector type One Type B port
Connector type 50 pin
Output voltage DC 24.0 to 26.4 V DC 4.75 to 5.25 V
Supported option Network Image Express Card