User's Guide Scanner GT-2500
Table Of Contents
- Copyright and Trademarks
- Contents
- Safety Instructions
- Overview of Your Scanner Features
- Guide to the Scanner Parts
- Placing Originals on the Scanner
- Scanning Using the Automatic Document Feeder
- Scanning Using the Document Table
- Using the Scanner Features
- Using the Optional Network Image Express Card
- Maintenance
- Troubleshooting
- Reading the Scanner Lights
- Scanner Problems
- Scanning Software Problems
- Scan Quality Problems
- The Edges of Your Document Are Not Scanned
- You See Only a Few Dots in Your Scanned Image
- A Line of Dots Always Appears in Your Scanned Images
- Straight Lines in Your Image Come Out Crooked
- Your Image is Distorted or Blurred
- Colors Are Patchy or Distorted at the Edges of Your Image
- Your Scanned Image is Too Dark
- An Image on the Back of Your Original Appears in Your Scanned Image
- Ripple Patterns Appear in Your Scanned Image
- Characters Are Not Recognized Well When Converted into Editable Text (OCR)
- Scanned Colors Differ from the Original Colors
- Automatic Document Feeder Problems
- Optional Network Image Express Card Problems
- Uninstalling Your Scanning Software
- Where To Get Help
- Technical Specifications
- Index
174 Technical Specifications
Mechanical
Electrical
Note:
Check the label on the AC adapter or on the back of the scanner for voltage
information.
Scanner
AC Adapter
New :For a single scanner
Dimensions Width: 468 mm (18.4 inches)
Depth: 395 mm (15.6 inches)
Height: 200 mm (7.9 inches)
Weight Approximately 10 kg (22 lb)
Input voltage DC 24 to 26.4 V
Rated voltage DC 24 V
Rated current 1.4 A
Power consumption 43 W operating
15 W stand-by mode
5 W sleep mode
100-120 V model
A371B
220-240 V model
A311E
Rated input voltage AC 100 to 120 V AC 220 to 240 V
Rated input current 0.8 A 0.4 A
Rated frequency 50to60Hz
Rated output
voltage
DC 24 V
Rated output
current
1.4 A