User's Guide Scanner GT-2500
Table Of Contents
- Copyright and Trademarks
- Contents
- Safety Instructions
- Overview of Your Scanner Features
- Guide to the Scanner Parts
- Placing Originals on the Scanner
- Scanning Using the Automatic Document Feeder
- Scanning Using the Document Table
- Using the Scanner Features
- Using the Optional Network Image Express Card
- Maintenance
- Troubleshooting
- Reading the Scanner Lights
- Scanner Problems
- Scanning Software Problems
- Scan Quality Problems
- The Edges of Your Document Are Not Scanned
- You See Only a Few Dots in Your Scanned Image
- A Line of Dots Always Appears in Your Scanned Images
- Straight Lines in Your Image Come Out Crooked
- Your Image is Distorted or Blurred
- Colors Are Patchy or Distorted at the Edges of Your Image
- Your Scanned Image is Too Dark
- An Image on the Back of Your Original Appears in Your Scanned Image
- Ripple Patterns Appear in Your Scanned Image
- Characters Are Not Recognized Well When Converted into Editable Text (OCR)
- Scanned Colors Differ from the Original Colors
- Automatic Document Feeder Problems
- Optional Network Image Express Card Problems
- Uninstalling Your Scanning Software
- Where To Get Help
- Technical Specifications
- Index
Troubleshooting 145
9
9
9
9
9
9
9
9
9
9
9
9
Pressing the Start Button Does Not Open the
Correct Program
❏ Make sure EPSON Scan is installed correctly. See the Start
Here sheet for instructions.
❏ Make sure your Windows system is set up for scanner events
as follows:
Windows XP:
Click the Events tab in your scanner's Properties window and
make sure Take no action is not selected. Also, make sure
the desired button is selected in the Select an event list box,
and Start this program is selected.
For Windows Me, 98SE, and 2000 users:
Click the Events tab in your scanner’s Properties window and
make sure the Disable device events check box is clear.
Also, make sure the desired button is selected in the Scanner
events list box, and the desired application in the Send to this
application list is selected.
❏ In Mac OS X, make sure you did not install the scanner
software in Classic mode or run it in Classic mode. Also make
sure you are logged on as the user who installed the scanner
software. Other users must first start EPSON Scanner Monitor
in the Applications folder and then press the a Start button
to scan.