User's Guide Scanner GT-2500
Table Of Contents
- Copyright and Trademarks
- Contents
- Safety Instructions
- Overview of Your Scanner Features
- Guide to the Scanner Parts
- Placing Originals on the Scanner
- Scanning Using the Automatic Document Feeder
- Scanning Using the Document Table
- Using the Scanner Features
- Using the Optional Network Image Express Card
- Maintenance
- Troubleshooting
- Reading the Scanner Lights
- Scanner Problems
- Scanning Software Problems
- Scan Quality Problems
- The Edges of Your Document Are Not Scanned
- You See Only a Few Dots in Your Scanned Image
- A Line of Dots Always Appears in Your Scanned Images
- Straight Lines in Your Image Come Out Crooked
- Your Image is Distorted or Blurred
- Colors Are Patchy or Distorted at the Edges of Your Image
- Your Scanned Image is Too Dark
- An Image on the Back of Your Original Appears in Your Scanned Image
- Ripple Patterns Appear in Your Scanned Image
- Characters Are Not Recognized Well When Converted into Editable Text (OCR)
- Scanned Colors Differ from the Original Colors
- Automatic Document Feeder Problems
- Optional Network Image Express Card Problems
- Uninstalling Your Scanning Software
- Where To Get Help
- Technical Specifications
- Index
Using the Optional Network Image Express Card 121
7
7
7
7
7
7
7
7
7
7
7
7
5. Press in as you tighten the thumbscrews to secure the card.
6. Plug the scanner’s power cord into an electrical outlet.
7. To initialize the Network Image Express Card, turn on the
scanner while holding down the Reset button on the card for
10 seconds. The red status light and green data light come on.
Note:
Be sure to initialize the Network Image Express Card whenever you
install or re-install it in the scanner.
8. Turn off the scanner.