User's Guide Scanner GT-2500
Table Of Contents
- Copyright and Trademarks
- Contents
- Safety Instructions
- Overview of Your Scanner Features
- Guide to the Scanner Parts
- Placing Originals on the Scanner
- Scanning Using the Automatic Document Feeder
- Scanning Using the Document Table
- Using the Scanner Features
- Using the Optional Network Image Express Card
- Maintenance
- Troubleshooting
- Reading the Scanner Lights
- Scanner Problems
- Scanning Software Problems
- Scan Quality Problems
- The Edges of Your Document Are Not Scanned
- You See Only a Few Dots in Your Scanned Image
- A Line of Dots Always Appears in Your Scanned Images
- Straight Lines in Your Image Come Out Crooked
- Your Image is Distorted or Blurred
- Colors Are Patchy or Distorted at the Edges of Your Image
- Your Scanned Image is Too Dark
- An Image on the Back of Your Original Appears in Your Scanned Image
- Ripple Patterns Appear in Your Scanned Image
- Characters Are Not Recognized Well When Converted into Editable Text (OCR)
- Scanned Colors Differ from the Original Colors
- Automatic Document Feeder Problems
- Optional Network Image Express Card Problems
- Uninstalling Your Scanning Software
- Where To Get Help
- Technical Specifications
- Index
110 Using the Scanner Features
2. Start your OCR program.
3. Start your OCR program’s scan function. EPSON Scan starts
in the last mode you used.
4. Select your scan settings as follows, depending on the mode
you are using:
Office Mode
❏ Select Auto Detect, ADF - Single-sided, ADF -
Double-sided, or Document Table as the Document
Source.
❏ Select Color or Black&White as the Image Type.
❏ Select 300 dpi as the Resolution
❏ Preview and adjust the scan area, if necessary.
If you are scanning using the ADF, see "Selecting EPSON
Scan Office Mode Settings" on page 42.
If you are scanning from the document table, see
"Selecting EPSON Scan Office Mode Settings" on page 72.
Home Mode
❏ Select Magazine, Newspaper, or Text/Line Art as the
Document Type.
❏ Select Black&White or Color as the Image Type
❏ Choose Printer or Other as your Destination setting.
❏ Preview and select your scan area as described in
"Previewing and Adjusting the Scan Area" on page 85.